TACTOO® Self Adhering Insul-Hangers were first introduced by AGM Industries in May of 1972. Since that time, they have proven their reliability to the industry, lowered labor costs, and eliminated the use of troublesome adhesive in many applications.
1 - Clean Surface
Make sure the work area is clean, dry, non-porous and free of all oil, film, rust, etc.
to assure proper adhesion.
2-Peel Off Backing
Simply remove the release paper from the self-adhering base plate.
3-Press in Place
Stick the hanger on to the properly prepared suitable flat surface, using a firm direct pressure. Do Not Twist.
4-Install Insulation
No waiting required. Secure insulation immediately after properly applying the hanger. Recommended load per anchor: 3lbs. (1.36 Kgs.)
Contact your nearest AGM distributor or representative for complete specs. and guidelines, or call our National Headquarters Toll Free: 1-800-225-9990
