AGM Industries - LS1200 Welder

AGM Model LS-1200

Solid State Welding System

For welding CD pins, cupped head pins, and threaded studs up to 3/8 - 16 (M10) diameter.

The LS-1200 is a solid state capacitor discharge welding system designed for welding various pins up to 10 ga. (3.42mm) and threaded studs up to 3/8 - 16 (M10) diameter, using a contact welding mode. It consists of the control/power pack, Model 250C weld gun, gun lead extension and ground cable with grounding clamp. The solid state power pack provides the source of energy for the welding process and all control and timing functions, including a "HI/LO" capacitance switch.

This system is capable of making up to 18 welds per minute, depending on the application. Weldable materials include steel, stainless steel and aluminum, as well as many of the copper and brass alloys.

Features:
• Solid State Circuitry
• Built in Circuit Breakers
• Weld Ready light
• Lightweight power pack
• Lightweight gun
• "HI / LO" power switch

The Model 250C Weld Gun has an operator actuated trigger button. The pin or stud must be in contact with the workpiece before the weld cycle can be actuated. Also, the control/power pack has an automatic discharge circuit, which is activated when the AC line switch is placed in the "off" position, or if the top cover is removed. These are some of the many safety features built into the AGM capacitor discharge welding system.

AGM uses only the highest quality components in the manufacture of their welders, thereby assuring
you of many hours of trouble free operation.

For additional information, or to order, contact your local AGM distributor, or the factory direct
at 1-800-225-9990.

CONTROL - POWER PACK		WELD GUN SPEC:
Construction	16 ga. (1.52mm) Fabricated Steel	Type	Pistol Grip
Dimensions	23" (584.2mm) Lx 9 1/2 " (241.3mm) W x 11 1/2" (292.1mm) H	Mode	Contact
Weight	69 lbs. (31.3 Kg.)	Weight	2 lbs (0.9 Kg)
Capacitance	"LO" (60,000 MFD) - "HI" (120,000 MFD)	Dimensions	8 1/2" (215.9mm) L x 2" (50.8mm) diam
Input Voltage	120 VAC, 60 Hz, 15 Amps (220 VAC. 50 Hz available for overseas use)	Feed	Manual
Weld Voltage	100-220 DC
Mode of Welding	Contact	ACCESSORIES
Weld Polarity	Straight or Reverse	Gun Lead Extensions	24 ft (7.3m) #6 Cable (Standard) 24 ft (7.3mm) #2 Cable for 5/16 - 18 (M8) and larger diameter studs
Weldable Stud Diam.	14 ga (2.03mm) pin thru 3/8 - 16(M10) Threaded Studs, including Cupped Head Pins (Aluminum Studs 5/16 - 18(M8) Non-Flanged Maximum)	Ground Cables	26 ft (7.9m) #6 Cable w/clamp (Standard) 12 ft (3.6m) #2 Cable w/clamp for 5/16 - 18 (M8) and larger diameter studs
Weld Rate	Up to 18 per min. (Based on pin/stud diam.)
Shipping Wt.	106 lbs. (48 Kg.)
Cubic Ft.	3.5 cu. ft. (.099 m3)