Return to Homepage.
spacer
AGM Model LS-1200

LS1200
250c Weld gun

Solid State Welding System
For welding CD pins, cupped head pins, and threaded studs up to 3/8 - 16 (M10) diameter.

The LS-1200 is a solid state capacitor discharge welding system designed for welding various pins up to 10 ga. (3.42mm) and threaded studs up to 3/8 - 16 (M10) diameter, using a contact welding mode. It consists of the control/power pack, Model 250C weld gun, gun lead extension and ground cable with grounding clamp. The solid state power pack provides the source of energy for the welding process and all control and timing functions, including a "HI/LO" capacitance switch.

This system is capable of making up to 18 welds per minute, depending on the application. Weldable materials include steel, stainless steel and aluminum, as well as many of the copper and brass alloys.

Features:
• Solid State Circuitry
• Built in Circuit Breakers
• Weld Ready light
• Lightweight power pack
• Lightweight gun
• "HI / LO" power switch
The Model 250C Weld Gun has an operator actuated trigger button. The pin or stud must be in contact with the workpiece before the weld cycle can be actuated. Also, the control/power pack has an automatic discharge circuit, which is activated when the AC line switch is placed in the "off" position, or if the top cover is removed. These are some of the many safety features built into the AGM capacitor discharge welding system.
AGM uses only the highest quality components in the manufacture of their welders, thereby assuring
you of many hours of trouble free operation.
For additional information, or to order, contact your local AGM distributor, or the factory direct
at 1-800-225-9990.
CONTROL - POWER PACK WELD GUN SPEC:
Construction 16 ga. (1.52mm) Fabricated Steel Type Pistol Grip
Dimensions 23" (584.2mm) Lx 9 1/2 " (241.3mm)
W x 11 1/2" (292.1mm) H		 Mode Contact
Weight 69 lbs. (31.3 Kg.) Weight 2 lbs (0.9 Kg)
Capacitance "LO" (60,000 MFD) - "HI" (120,000 MFD) Dimensions

8 1/2" (215.9mm) L
x 2" (50.8mm) diam
Input Voltage 120 VAC, 60 Hz, 15 Amps
(220 VAC. 50 Hz available for overseas use)		 Feed Manual
Weld Voltage 100-220 DC  
Mode of Welding Contact ACCESSORIES  
Weld Polarity Straight or Reverse Gun Lead Extensions 24 ft (7.3m) #6 Cable (Standard)
24 ft (7.3mm) #2 Cable for 5/16 - 18 (M8) and larger diameter studs
Weldable Stud Diam. 14 ga (2.03mm) pin thru 3/8 - 16(M10) Threaded Studs, including Cupped Head Pins
(Aluminum Studs 5/16 - 18(M8) Non-Flanged Maximum)		 Ground Cables 26 ft (7.9m) #6 Cable w/clamp (Standard)
12 ft (3.6m) #2 Cable w/clamp for
5/16 - 18 (M8) and larger diameter studs
Weld Rate Up to 18 per min.
(Based on pin/stud diam.)		  
Shipping Wt. 106 lbs. (48 Kg.)  
Cubic Ft. 3.5 cu. ft. (.099 m3)  
 
AGM Industries, Inc.
16 Jonathan Drive, Brockton, MA 02301
Tel:(508) 587-3900   Fax:(508) 587-3283  Toll Free: 800-225-9990
Copyright © AGM Industries, Inc. All Rights Reserved.
Last updated on January 3, 2005